| SPECIFICHE | |
|---|---|
| INTRECCI | ⚠️ VISUALIZZA IL MANUALE QUI |
| COMPRALO SE : | You have an eMTN bike with either a Brose Mag family, FazuaR50, TQ-HPR50 Bafang M800 motor or the new Specialized Levo4 |
| MOTORE | BROSE Mag Family-With steel ISIS spline spindle FAZUA-R50 -With steel ISIS spline spindle TQ-HPR50/HPR60 -With steel ISIS spline spindle Bafang M800 -With steel ISIS spline spindle Specialized Levo4 -With steel ISIS spline spindle |
| MATERIALE | Left & Right arm set - Carbon Fiber (with rubber boots) - Alloy |
| AVG. PESO | LEGA = 520 g CARB = 460g |
| Fattore Q | Qfactors when you install this crank on these motors : Q = 171mm : on FazuaR50 motor Q = 171mm : on TQ-HRP50/HPR60 motor Q = 172mm : on Levo4 motor Q = 183mm : on Bafang 800 motor Q = 186mm : on Brose Mag motor Q = 186mm : on SRAM Powertrain motor |
| BULLONE PRINCIPALE | Bullone della manovella principale AL da 8 mm per installazione/autoestrazione | coppia di serraggio 50 Nm
Le nostre pedivelle eCranks con scanalatura ISIS utilizzano il nostro bullone principale in lega M24 sostituibile. M24 in lega per bullone principale/autoestrattore |
| TECNOLOGIA | C.R.A.F.T. Cabon Mfg. |
| NOTA VIP | VIP – Do NOT order this crank if you own a Gen 1-3 versions Specialized Levo/Kenevo/Vomo/Vado. If you have a Gen 1-3 Specialized e-bike with steel ISIS spline spindle then GO HERE. |




