| SPEZIFIKATIONEN | |
|---|---|
| EINLEITUNGEN | ⚠️ ANLEITUNG HIER ANSEHEN |
| KAUFEN SIE DIESES, WENN : | You have an eMTN bike with either a Brose Mag family, FazuaR50, TQ-HPR50 Bafang M800 motor or the new Specialized Levo4 |
| MOTOR | BROSE Mag Family-With steel ISIS spline spindle FAZUA-R50 -With steel ISIS spline spindle TQ-HPR50/HPR60 -With steel ISIS spline spindle Bafang M800 -With steel ISIS spline spindle Specialized Levo4 -With steel ISIS spline spindle |
| MATERIAL | Left & Right arm set - Carbon Fiber (with rubber boots) - Alloy |
| AVG. GEWICHT | ALLOY = 520g CARB = 460g |
| Q-Faktor | Qfactors when you install this crank on these motors : Q = 171mm : on FazuaR50 motor Q = 171mm : on TQ-HRP50/HPR60 motor Q = 172mm : on Levo4 motor Q = 183mm : on Bafang 800 motor Q = 186mm : on Brose Mag motor Q = 186mm : on SRAM Powertrain motor |
| HAUPTSCHRAUBE | 8mm AL Hauptkurbelschraube für Einbau/Selbstausbau | 50Nm Drehmoment
Unsere eCranks mit ISIS Spline verwenden unsere austauschbare M24-Legierung Hauptschraube/Selbstabzieher |
| TECH | C.R.A.F.T. Cabon Mfg. |
| VIP-HINWEIS | VIP – Do NOT order this crank if you own a Gen 1-3 versions Specialized Levo/Kenevo/Vomo/Vado. If you have a Gen 1-3 Specialized e-bike with steel ISIS spline spindle then GO HERE. |




