EC-TYPE3

Price range: $85.00 through $280.00

These MTN eCranks are best for eBikes with :

- TQ-HPR50 & New HPR-60
- Specialized New Levo4
- Brose Mag Family
- Fazua-R50
- SRAM Powertrain
- Bafang M800

SKU : N/A Catégories : MANIVELLES, MANIVELLES ÉLECTRONIQUES

ARM

LONGUEUR

Clair

SPÉCIFICATIONS
INTRUCTIONS	⚠️ VIEW MANUAL HERE
ACHETEZ-LE SI :	You have an eMTN bike with either a Brose Mag family, FazuaR50, TQ-HPR50 Bafang M800 motor or the new Specialized Levo4
MOTEUR	BROSE Mag Family-With steel ISIS spline spindle FAZUA-R50 -With steel ISIS spline spindle TQ-HPR50/HPR60 -With steel ISIS spline spindle Bafang M800 -With steel ISIS spline spindle Specialized Levo4 -With steel ISIS spline spindle
MATÉRIEL	Left & Right arm set - Carbon Fiber (with rubber boots) - Alloy
POIDS MOYEN POIDS	ALLOY = 520g CARB = 460g
Facteur Q	Qfactors when you install this crank on these motors : Q = 171mm : on FazuaR50 motor Q = 171mm : on TQ-HRP50/HPR60 motor Q = 172mm : on Levo4 motor Q = 183mm : on Bafang 800 motor Q = 186mm : on Brose Mag motor Q = 186mm : on SRAM Powertrain motor
BOULON PRINCIPAL	Boulon de manivelle principale AL 8mm pour installation/extraction automatique \| couple 50Nm Nos manivelles eCranks avec ISIS Spline utilisent notre boulon principal/extracteur automatique en alliage M24 remplaçable. boulon principal/auto-extracteur en alliage M24 remplaçable.
TECH	C.R.A.F.T. Cabon Mfg.
NOTE VIP	VIP – Do NOT order this crank if you own a Gen 1-3 versions Specialized Levo/Kenevo/Vomo/Vado. If you have a Gen 1-3 Specialized e-bike with steel ISIS spline spindle then GO HERE.

EXPÉDITION